La description

Key Facts The option R&S®EMC32-K33 extends the emission measurement capabilities of R&S®EMC32 for running emission measurements in the reverberation chamber operated in the mode tuned mode according to EN 61000-4-21:2003.
Features & Benefits
  • Radiated Emission Measurement according to EN 61000-4-21:2003 Annex E (mode tuned operating mode)
  • Preview Measurement for different tuner steps in defined frequency subranges
  • Calculation and display of the DUT’s radiated power and estimated free space field strength
  • Optional data reduction to mark the critical frequencies compared to the limit line
  • Fully integration of the test results into the R&S®EMC32 test report
  • Supports usage of chamber calibration data and DUT check data from the R&S®EMC32-K3 susceptibility section for R&S®EMC32
The emission measurement in the reverberation chamber is executed as an R&S®EMC32-K10 EMI Auto Test sequence where the following sequence steps are executed:
  • Preview measurement with maximum hold and averaging of the measured radiated power over one tuner rotation (using the predefined tuner steps of the EMI Scan / Sweep template for this subrange) and for each HW Setup frequency subrange.
  • The averaged and max hold values will be shown is a separate graphics. After one subrange over one tuner rotation is completed the evaluated results will be shown in a radiated power and estimated E-field strength graphics.
  • Data Reduction: optional a data reduction of the estimated E-field data may be executed in order to mark the critical frequencies in the graphics and to generate a final result table containing these frequencies. In this case also a limit line will be drawn in the E-field strength graphics.
''